215026
73
Revision A
4.2
Preparing Machine for Servicing
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, always stop engine and remove
key before leaving the operator
’
s seat, and always engage safety props before going under the machine for any reason.
CAUTION
To avoid personal injury, perform the following procedures before servicing disc header or opening drive covers:
1.
Lower the header fully. If you need to perform service in the raised position, always engage safety props. For
instructions, refer to
3.2.1 Engaging and Disengaging Header Safety Props
2.
Put the ground speed lever (GSL) in PARK.
3.
Stop the engine and remove the key from the ignition.
4.
Wait for all moving parts to stop.