215026
144
Revision A
1030748
A
Figure 4.146: Cutterbar Spindle
5.
Install new shear pin (A) with a pin punch and hammer.
Repeat on the other side of spindle.
NOTE:
Ensure that the ends of the shear pins do
NOT
protrude
past the step in the hub.
1030741
A
B
Figure 4.147: Cutterbar Spindle
6.
Install nut (A) and spacer plate (B).
1016425
A
B
C
D
Figure 4.148: Spindle Nut
7.
Attach safecut spindle-nut wrench (B) 90° (D) to the torque
wrench (A).
IMPORTANT:
If the wrench is not attached correctly, the proper torque
will
NOT
be applied to the nut.
8.
Position safecut spindle-nut wrench (B) on spindle nut (C).
Torque nut to 300 Nm (221 lbf·ft).
