215026
156
Revision A
4.9.2
Removing Cutterbar Curtain
1.
Raise header fully and engage safety props. For instructions, refer to
3.2.1 Engaging and Disengaging Header Safety
.
1028485
A
B
C
Figure 4.168: Cutterbar Curtain
–
View from Below
2.
Remove hex flange head bolt and washer (A) securing
curtain (B) to the inboard side of the end panel.
NOTE:
Cutterbar removed from illustration for clarity.
3.
Loosen six lock nuts (C) securing curtain (B) to the front of
the header frame. Do
NOT
remove nuts at this time.
NOTE:
Curtain seam is on the inside.
1028486
A
B
C
D
E
Figure 4.169: Cutterbar Curtain
–
View from Front
4.
Remove bumper (A) by sliding it off of bumper mount (D).
NOTE:
Top shield removed from illustration for clarity.
5.
Remove six M10 bolts (B), six lock nuts (C), and bumper
mount (D).
6.
Repeat Steps
to
at the opposite
end of the header.
7.
Remove curtain (E).