215026
98
Revision A
1.
Park on a flat, level surface.
2.
Lower the disc header fully, shut off the engine, and remove the key.
NOTE:
To prevent oil from spilling from the cutterbar while installing disc spindles, ensure the disc header is on a flat, level
surface, and is tilted all the way back.
3.
Determine the suitable spindle rotation pattern for the crop conditions. For instructions, refer to
.
1011395
A
Figure 4.39: Left Spindle O-ring
4.
Ensure that spindle O-ring (A) is properly seated, cleaned,
and undamaged.
1011393
A
Figure 4.40: Left Spindle
5.
Insert spindle (A) into the cutterbar.