215026
95
Revision A
1029255
A
B
Figure 4.33: Cutterbar Disc and Cap
8.
Remove cutterbar disc cap (A).
9.
Remove cutterbar disc (B).
IMPORTANT:
Blades are rotation specific. Switch the entire disc when
swapping spindles.
1011389
A
Figure 4.34: Spacer Plate
10. Remove spacer plate (A).
NOTE:
The area around the spindle must be cleaned thoroughly to
prevent debris from entering into the cutterbar gearbox.
1011375
A
B
Figure 4.35: Left Spindle Hub and Hardware
11. Rotate spindle hub (A) to access nuts (B), and remove
eleven M12 lock nuts (B) and washers.