215026
160
Revision A
1028322
A
Figure 4.177: Roll Timing Gearbox Bearings
10. Inspect roll timing gearbox bearings (A) for signs of wear or
damage. If the bearings need replacing, contact your
Dealer.
Conditioner Drive Belt
The conditioner drive belt is located inside the left driveshield and is tensioned with a spring tensioner.
Inspecting Conditioner Drive Belt
Check the belt tension after the first 25 hours, and then check and inspect for damage or wear every 100 hours.
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Lower the rotary disc header fully.
2.
Shut down the engine, and remove the key from the ignition.
1028480
A
Figure 4.178: Left Driveshield
3.
Open left driveshield (A). For instructions, refer to
