215026
132
Revision A
Removing Right Driven Drum and Driveline
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove key, and
engage windrower lift cylinder safety props before going under machine for any reason.
WARNING
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear gloves when
handling blades.
1.
Raise the header.
2.
Shut down the engine, and remove the key from the ignition.
3.
Engage the windrower safety props. For instructions, refer to
3.2.1 Engaging and Disengaging Header Safety Props
.
1030429
A
Figure 4.118: Cutterbar Curtain
4.
Open cutterbar curtain (A). For instructions, refer to
Opening Cutterbar Curtain, page 45
.
1028513
A
B
C
Figure 4.119: Driveline Shield
5.
Remove two M10 hex flange head bolts (A) and loosen two
M10 hex flange head bolts (B). Remove driveline shield (C).