215026
45
Revision A
3.6
Cutterbar Curtain
WARNING
To reduce the risk of personal injury and machine damage, do NOT operate the machine without curtain installed and
in good condition. Foreign objects can be ejected with considerable force when the machine is started.
1028174
A
Figure 3.58: Cutterbar Curtains
NOTE:
Cutterbar curtain is attached at the front and the sides of the
header.
ALWAYS
keep curtain lowered when operating the disc
header.
IMPORTANT:
Replace curtain (A) if it becomes worn or damaged. For
instructions, refer to
4.9.1 Inspecting Cutterbar Curtain, page
3.6.1
Opening Cutterbar Curtain
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1028779
A
Figure 3.59: Cutterbar Curtain
1.
Push curtain (A) inward and up.
