![background image](http://html1.mh-extra.com/html/macdon/r216/r216_operators-manual_3439773147.webp)
215026
135
Revision A
Installing Right Driven Drum and Driveline
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove key, and
engage windrower lift cylinder safety props before going under machine for any reason.
WARNING
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear gloves when
handling blades.
1030991
A
B
Figure 4.125: Right Driven Spindle
1.
Ensure spacer (A) is on the spindle.
2.
Apply an anti-seize compound to spindle splines (B).
1028520
A
B
Figure 4.126: Right Driven Drum
–
View from Above
3.
Position drum disc assembly (B) 90° from neighboring disc.
4.
Use an 18 mm deep socket and an extension to install four
M12 bolts (A) and washers that hold the drum disc in place.
Torque hardware to 85 Nm (63 lbf·ft).