215026
34
Revision A
1030596
A
B
C
D
E
F
Figure 3.33: Hydraulic Connections
16. Connect the hydraulic hoses to the windrower with quick
coupler fittings as follows:
a.
Connect disc pressure hose (A) with coupler (B) and
torque to 205
–
226 Nm (151
–
167 lbf·ft).
b.
Connect disc return hose (C) with coupler (D) and
torque to 205
–
226 Nm (151
–
167 lbf·ft).
c.
Connect case drain hose (E) to fitting (F), with relief
valve pointing towards the ground.
NOTE:
If required, loosen fitting (F) and retighten as needed to
ensure relief valve is pointing straight down as shown.
17. To connect electrical harness, refer to Steps
to
To connect electrical harness, follow these steps:
1030514
A
B
Figure 3.34: Electrical Harness Secured to Center-Link
18. Free electrical harness (A) from adjustable strap (B).