215026
158
Revision A
4.10
Conditioner
Rolls condition the crop by crimping and crushing the stem in several places, which allows the release of moisture resulting
in faster drying times. There are two roll conditioner options
—
steel conditioner rolls and polyurethane rolls.
4.10.1
Inspecting Conditioner
Inspect conditioner roll bearings, feed roll bearings, and driveline U-joints for signs of wear or damage.
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove key, and
engage windrower lift cylinder safety props before going under machine for any reason.
WARNING
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear gloves when
handling blades.
1.
Lower the header fully.
2.
Shut down the engine, and remove the key from the ignition.
1028420
A
Figure 4.172: Driveshields
3.
Open driveshields (A). For instructions, refer to
1030654
A
Figure 4.173: Feed Roll Left Bearing
–
View
from Below
4.
Inspect feed roll left bearing (A) for signs of wear or
damage. If the bearing needs replacing, contact your
Dealer.
