Quick guide for Implantmed SI-1010 / SI-1015 / SI-1023
Hygiene and maintenance – Motor with cable
Start-up – General
Connect the mains cable
and foot control.
Connect motor cable.
Insert the irrigant support. Attach the universal
support and lock it.
Open the pump cover.
Insert the irrigation tubing.
Close the pump cover.
Plug the mains cable into
a earthed power socket.
Switch on the control unit
at the power switch.
Control unit operation – Main menu
16
max. 50 Ncm
1:1
rpm
40 000
Implantology 1
My favorites
Set program
Documentation (DOCU)
Set speed / torque
Setup
Progress display mode
Forward/reverse operation mode
Programs 1 to 5
Set coolant volume
Pre-disinfection
>
If heavily soiled, clean first with disinfectant cloths.
Motor with cable
Do not twist or kink the motor cable! Do not coil it
too tightly!
Manual cleaning
>
Rinse and brush off with demineralized water (< 38°C)
Mechanical cleaning and disinfection
>
Use only thermo washer disinfectors with a drying
program for preparation.
Sterilization
W&H recommends sterilization according to EN
13060, class B. Other sterilization methods may
reduce the life span of the motor.
storage
>
Store sterile goods dust-free and dry.
S-N2
S-NW
