79
PW=ABCD,IOGPRS=1,I1EVENT=110,I1PART=01,I1ZONE=001,IDELAY=25,I1LHEN=1,I1INV=
0,I1ARM=0,TEL1=0036201234567,I1S=1,I1V=1,IVSMS=1,I1ON=FAIL,I1OFF=GOOD,SMSFW
D=1,RESET
PW=ABCD,ISABEVENT=331,ISABON=SABOTAGE,OUTMODE=0,SIRENOUT=1,SIRENDEL=30,RESE
T
4.
Standalone alarm system operation mode
: There are sensors/sabotage switch
connected to the input lines (2pcs of devices, by IO-expansion max. 8pcs) for monitoring,
the siren is connected to the output line, and the signals are transmitted through GPRS
network to the remote server IP address.
PW=ABCD,GPRSEN=1,SFUNCT=0,ACCOUNT=1130,LFFREQ=300,LFPRES=1,APN=NET,SERVER1=
89.133.189.139,PORT1=9999,SERVER2=10.197.251.10,PORT2=8010,IPPROTO=TCP,
RESET
PW=ABCD,SWPROTO=1,IOGPRS=1,I1EVENT=110,I1PART=01,I1ZONE=001,IDELAY=25,I1LHE
N=1,I1INV=1,I1ARM=1,TEL1=0036201234567,TEL2=36207654321,I1S=1,I1ON=FAIL,RES
ET
PW=ABCD,I1OFF=GOOD,SMSFWD=1,ISABEVENT=331,ISABON=SABOTAGE,ISABOFF=GOOD,I1S=
1,I2S=1,OUTMODE=1,ARMSMS=1,ARMON=ARM,ARMOFF=DISARM,ARMFAIL=ARM.FAIL,RESET
PW=ABCD,ARMBLOCK=1,DOALLDIAL=1,CALLTOKENS=30,RESET
5.
Input monitoring (surveillance) and gate opening
: There are sensors and
sabotage switch connected to the voltage/contact inputs (2pcs of devices, by IO-expansion
max. 8pcs) for monitoring. The short/wire cut detection of the input lines is possible. The
relay output(s) are able to controlled remotely (the output nr. #1 can be also used for gate
opening the further 3pcs of inputs are possible to use for switching external devices). The
GPRS network is using for remote controlling in this mode, the GSM network is only used for
SMS notification and ringing (voice call). The GPRS signalling can also be performed to an IP
address
–
by option.
PW=ABCD,GPRSEN=1,IDELAY=25,I1INV=1,I1S=1,I1ARM=1,TEL1=0036201234567,OUTMODE
=1,GATESMS=1,GATEON=GATE.ON,GATEOFF=GATE.OFF,RESET
