23
b.) Connecting through TCP IP (remotely)
In the
Connection window
(1)
at the
TCP-IP
tab you will found the necessary IP settings for the
GPRS connection.
Fill the SIM card IP address to the
Device IP
(get the information from your mobile service
provider).
Fill the port number what you want to the field
right from the
Device IP
. (The port number by
default is
9998
). To the
GPRS Login
you have
to fill the device IMEI
last
5 character
(you can
read/copy it from the left side at the IMEI coloumn).
Attention
You can connect on GPRS only when the
GPRSEN
parameter is enabled at the
GPRS Settings
!
Push the
Connect
for the GPRS connection. (The button is active only if the serial connection is
currently inactive (
Close
status)).
(For login the necessary device IMEI and IP address can be requested by the
INFDEV
or
DEVSTAT
SMS text caommands.)
Hint:
When you can connect on serial
port, before connecting it is useful to check the
Serial Port
tab according to the description
a.)
shortly when the device will readout the value IMEI, IP data.
Afterall you can split the connection with the
Close
, then
at the
TCP-IP
tab you can connect with
the readout data filling to the
Device IP
and
GPRS Login
fields.
After the successful connection
…
When connecting, the signal strength diagram and
status piktograms will be grey for a short time. This
means that currently there are no available status
and signal strength values.
Later the
PIN/GSM/GPRS status
and
signal (CSQ
)
values will be visible by colours.
