64
For monitoring a sabotage switch or further sensors, the CID event code must be defined at
the
IxEVENT
parameter, with the partititon number (
IxPART
), zone (
IxZONE
). (The ’
x
’
means the number of the input line in the name of the parameter).
Here you can define values only for the input line nr. #1 and #2. The IO-expansion settings
will be listed later.
Gate opening and output controlling settings
For
configuring the gate opening
open
the
Output Settings
parameter
group at the
Device
Type
. Then the program will load the related parameters.
Attention! The gate opening can be used only through the output nr. #1. Through
the IO-expansion nr. #2-4 you can remotely control or switch further external
devices
(see in the next part (IO-expansion settings))
.
