48
If you’ve changed one of the listed parameter values, then the program will highlight the
changed value lines by
bold
. For sending the listed parameter values for the device
(regarding the
Selected
coloumn)
–
check the proper selection
–
push the
Write config
button at the bottom of the screen. At the end of the parameter sending, the device is
restarting by using the new settings.
Notification sending settings
For the
alarm notification and messaging settings
open the
Notification
Parameters
parameter group
at the
Device Type
. Then the program will load the related parameters.
TELx
–
SMS notification can be setup for max. 4 phone numbers
It can be defined by the
IxS
parameter that in case of input status changes for which phone
numbers must the device sending SMS text message notification. Choose one from the
possible notification sequence combinations.
