34
The device will execute the
ERASECONF
command. After 30 seconds, the device will
be rebooting when the
^SHUTDOWN
meessage appears. The statuses will be
faded out during the config restore method.
Important! The device will started without any configuration settings!
Open the configuration file and send it (Write conf.) to the Easy2 as we described, then
perform the necessary parameter configuration according to the Chapter nr. 5.
4.10 Manual arming
The
Easy2
alarming can also be controlled
manually from the
EasyTerm
.
You can control it, besides the
ARM
title in
the
Status window
with the
ON
/
OFF
buttons
–
in case of using the Easy2 as a
standalone alarm system!
Here, you can check that the alarm system
was armed (
ON
) or disarmed (
OFF
)
–
due to
the current status.
Anyway, it is possilble to remotely control the
Easy2
arming through SMS messages.
4.11 Gate opening
The
Easy 2
output can also be manually controlled with the
EasyTerm
. When the output was
configured (
OUTMODE
parameter) to
GATE
, than the output will be used as a gate opening system.
