LumaSMART
®
User Manual
Using the Software
•
74
System Status Relay History
The System Status Relay History contains a time stamped log detailing every time the relay changed states and the
reason for the change. For example, if there are no system alert conditions, the state is energized. Conversely, an
alert condition is indicated by a Deenergized state. Therefore, a power outage will leave the relay in the alert state.
For a list of fault conditions, see Section 4.3.3.1
. Typical entries are shown as follows:
11/3/2013 13:48:30 Alarm:DeEnergize:Err:Probe:Battery Life:FOT1 Port Open:Startup Date:
12/5/2013 12:11:58 Restore:Energize:Err:None...
On March 11
th
, the System Status Relay was in the Alarm/DeEnergized state due to 4 different fault conditions.
On the May 12
th
, the System Status Relay was in the Restore/Energized state since there were no fault conditions.
Note:
Whenever there are two consecutive entries that have the same description, the second time
stamp represents a system restart.
Configuration
The LumaSmart controller maintains an .xml encoded file that contains all of the customizable configuration
information of the LumaSMART. This selection allows the contents to be viewed and the file exported. You can use
the
Export/Import Configuration File
(see Section 5.2.1.3) feature to back up a configuration file and also import a
modified version. Access to the configuration file is intended for servicing and troubleshooting.
Service Diagnostic Log
The Service Diagnostic Log is intended for servicing and troubleshooting. It contains internal system operational
information intended for use by factory service personnel. Its contents are not intended for end-user consumption.
Exporting this file and providing a copy of it to LumaSense service personnel may be requested for
troubleshooting.
Data Graph Log
The Data Graph Log feature provides a graphical display of a data log. Data logs record the temperature once per
minute and the signal strength measurements once per hour.
Data Log Graph Date Selection
The screen provides you with the ability to select the desired channels as well as the Temperature and/or Signal
Strength Report. When the ‘Today’ or ‘Yesterday’ button is pressed, the data automatically sets the data
accordingly.
