LumaSMART
®
User Manual
Using the Software
•
53
5
Using the Software
5.1
Home Screen
The home screen displays a scrolling list of all the available probe channels. This view displays basic information
about each channel, such as temperature (or P.E. for probe error if a signal is not available) and channel name. All
temperatures are in Celsius. Channel statuses update every
10 seconds.
Channels (Home) Screen
Note:
To return to this screen at any time, click the
Home
button:
To set a channel’s name or enable/disable it, go to
Menu > Setup > Channel Setup
. See Section 5.2.1
for
more setup information.
To set the speed of temperature channel rotation for this screen and the time before the backlight turns off, go to
Menu > Display
When a probe is properly connected and not in an alarm state, it will display its current temperature reading.
When a probe is not connected properly or has become damaged, it will display “P.E.” If the module that monitors
a probe fails, “N.C.” (No Communication) will be shown. When a probe is disabled, it will display “DSBL”.
5.1.1
Viewing All Relays
The
View All Relays
screen contains a scrollable list of all relays and their current status. A
Disabled
status means
that the relay must be activated and configured via the Setup menu. See Section 5.2.1.4 for
