LumaSMART
®
User Manual
Using the Software
•
67
Channel Setup
The Channel Setup Overview screen allows you to configure each channel’s name and disable channels not in use.
Channel Setup Overview Screen
To edit a channel:
1.
Press
Edit
to view a screen where you can change the channel name or enable/disable a channel.
Channel Setup Screen
2.
Press
Edit
next to the channel’s name to bring up a keyboard where you can enter an alphanumeric
channel name.
3.
Press
Enabled
or
Disabled
to enable or disable the channel. (The button will turn green to indicate your
selection.)
4.
Press
Save
before leaving the screen to apply your changes. It is advisable to disable channels that are not
in use or those that have recently failed. Doing so will keep the channel from affecting the System Status
Relay.
Note:
The temperature reading and signal strength for a channel that has been disabled will show
“DSBL”.
5.2.2
Transformer Info
The Transformer Info screen displays the details of your transformer, including name, type, and year of
manufacture. See Section 5.2.1.1
to set up or edit transformation information.
