LumaSMART
®
User Manual
DNP3 Protocol Testing
•
121
8.3
DNP3 Enable Unsolicited Reports
To simplify this test, the unsolicited reports will be enabled. This will allow the data window to refresh
automatically without having to invoke a status
Integrity Data Poll
after each LumaSMART configuration change.
Select the
Enable/Disable Unsolicited Messages
command and press
Once.
Enable Unsolicited Reports
The Data Window should automatically start refreshing on a 1 minute interval, which is the same rate at which the
LumaSMART Data Logs are captured.
8.4
Binary Inputs Data
Select the Binary Input data in the Data Window
