LT HYDRA Plus, Manual

Page: 188 / 258

15-6
&
CHANNELS & SCROLLERS PATCH
HYDRA PLUS – LT LIGHT
If the active cell is a
Drk
:
To edit the number of the dark gel (remember that this gel use 2 frames), enter the number of the
first of the frames.
To delete the value of
Drk
, press
DELETE
The frames of the dark gel (double gel) are marked with a
–
between them.
A scroller only can have defined a dark gel
If the active cell is a
00
to
17
:
To edit the value of the Dmx level for the selected frame, enter its value here (
0-FF
).
By default, the system assigns a lineal value for each frame. Only if the gels have different sizes
will be necessary to adjust these levels. A frame, if it exists, always must be a value.
To find the correct value for each frame, it’s possible to use the
Test
function. While a scroller is selected you can move
R2
to test
its scene output. Move this wheel until center in scene the desired
color, and in this moment, press
INSERT
to copy its output value.
In any cell:
It’s possible to test the response of the selected scroller in scene,
moving
R2
. The test level is showed in display and monitor (up-right).
THE
+Edit
WINDOW
To access to this window: use the mouse, or press
ENTER
in the cell
+
of the selected scroller.
Here it’s possible to edit (modify or delete) as many directions & associated channels as will be
necessary. In this window:
Dmx
: They are the directions assigned to the selected scroller.
Cha
: They are the associated channels for the selected scroller.
The values by default are presented in gray.
To edit a new direction, access to the last empty
Dmx
cell.
To edit a new associated channel, access to the last empty
Cha
cell.
To quit of this window press
EXIT
Remember, a direction only can be associated a 1 scroller. Each time that a direction is edited
here, its original association is lost.