LT HYDRA Plus, Manual

Page: 136 / 258

11-6
&
MACROS
HYDRA PLUS – LT LIGHT
•
Macros 2 and 3, named
Flash 50%
and
Flash 100%
, change the Flash level a 50% and
100% respectively.
•
Macro 4, named
10KW
, selects all the groups of the 10 KW lamps, in the example, the
groups 1, 5 and 65.
•
Macro 5, named
MIDI ON
, activates the MIDI port.
MACROS AND SPOTS
Programming with spots, a lot of functions are very used. It’s possible to create a macro with
them to can repeat them more quickly.
Example: A macro that sets at
Home
the color parameters of the spots 1, 3 & 5:
MACRO REC
SPOT 1 SPOT 3 SPOT 5 COLOR @ 0
MACRO
{
type
HomeCol} EXIT
Tip
:
If during the macro recording, a warning message appears; press
C
to clear the message and
follow with the recording process.
When a macro must begin with a numeric key, is recommended insert
C
before the number to
avoid that this number can be modified with other number, in command line, still no used.
As a macro can be executed at any moment, it’s recommended don’t used the default selection
(of command line). See chapter 5.
POWER-UP MACRO
A macro can be configured to execute it each time that the console is turned on. In this way it’s
possible that the console executes any thing when it is turned on, and this is very used in small
exhibitions where the console works without operator.
This macro is programmed in the menu
38: Power-Up Macro
See chapter 14.