LT HYDRA Plus, Manual

Page: 123 / 258

CROSSFADERS
&
10-7
HYDRA PLUS – LT LIGHT
The
GOBACK
command doesn’t compute the
T
·
. This command can be configured to
execute a inverting crossfade with the programmed times or using other time,
GObACK Time
;
that can be edited in the menu
30: Editor & Times
or in
MEMLST
table.
In monitor, it’s possible to observe the crossfade progress, where:
Crossfade computing programmed
T
·
in the memory 1.
Normal crossfade, the memory 2 (next) is fading in scene (0% to 100%).
Paused crossfade.
Inverted crossfade, the memory 2 is fading-out scene (100% to 0%).
PRIORITY CONTROL (MASTERS)
If several active sequences are executed in masters, only the last activated has priority over its
LTPs
. To recover the priority control in any other active sequence (in a master) press:
PRIO q Mn
CONFIGURATION OF THE CROSSFADERS
ASSIGNX
&
ASSIGNY
are the assignation keys of the crossfaders, but they also are used to
configure it. It’s possible to configure the crossfade type,
Dipless
or
Split
; and if the crossfade
will compute the
T
·
,
T
·
On
or
T
·
Off.
The current configuration for each crossfader appears in
its status line.
To configure both options, press:
ASSIGNX
#
Where
#
is the index number of the selected option.
In a
dipless
crossfade, the channels, scrollers and spot parameters that are in both, the
X1
memory and the
X2
memory, never fade down the minimum level stored in the
X2
memory.
When a crossfader is configured as
T
·
Off,
it doesn’t compute the
T
·
programmed in the
memories.
Note that in the options window, there are options to configure the corresponding crossfader or
both crossfaders at the same time.