LT HYDRA Plus, Manual

Page: 124 / 258

10-8
&
CROSSFADERS
HYDRA PLUS – LT LIGHT
Note:
When a sequence is executed using a master, these options are not available. These sequences
always are
dipless
and have the
T
·
as actives (
T
·
On
)
THE ORDER OF THE MEMORIES
The memories sequence assigned to the crossfade or a master are executed in ascendant
numerical order. This order can be broke for: A programmed jump or a manual displacement.
PROGRAMMED JUMP
The
Jump
of a memory has the memory number that will be
executed after it (its next memory). The
Lp
has the number of
times that this programmed jump will be executed (1-99). If
Jump
is empty the next number of memory in sequence will be
executed. If
Lp
is empty the programmed Jump is executed
always. To delete a
Jump
or
Lp
enter a
0
.
In this example there are 10 consecutive memories, 1 to 10, and
the memory 7 has a
Jump
to the 9; the memory 10 has a
Jump
to the 1, with a
Lp
of 3 times.
Then, when the memories 1 to 10 are assigned in the crossfade
X
(for example), the memories list is as in the figure.
Note that the
Lp
value (in pink) goes decrementing it, until 0. In
this moment the Jump stops to execute it.
MANUAL DISPLACEMENT
In crossfaders
To select the desired memory as next memory,
#,
press:
MEM # ASSIGNX
Memory
#
is assigned in
X2
.
At any moment, it’s possible to advance to the next memory in the list, immediately (without
fades), pressing:
PAUSE q GO
To advance for more than 1 memory, press:
PAUSE
q
GO GO GO... PAUSE
p