LT HYDRA Plus, Manual

Page: 91 / 258

MASTERS AND PAGES
&
8-5
HYDRA PLUS – LT LIGHT
For groups:
Mode Option A Option B
GROUP
GROUP # LOAD Mn MEM # LOAD 0 Mn
GROUP Absolute
GROUP # LOAD LOAD Mn MEM # LOAD 1 Mn
GROUP Inhibit
GROUP # LOAD LOAD LOAD Mn MEM # LOAD 2 Mn
For memories:
Mode Option A Option B
MEM
MEM # LOAD Mn MEM # LOAD 3 Mn
MEM Absolute
MEM # LOAD LOAD Mn MEM # LOAD 4 Mn
MEM Inhibit
MEM # LOAD LOAD LOAD Mn MEM # LOAD 5 Mn
The mode also can be selected when we load several masters at the same time; example: Load
memories from 1 to 5 in inhibit mode in the masters from 1 to 5 pressing:
MEM 1 THRU 5 LOAD 5 M1
MASTER IN MONITOR
The base screen 0 shows us alls masters, each one with its status and content.
ß
Masters status line.
ß Master number & output level.
ß Group text or memory text.
ß
Master content & mode.
ß Time information.
The masters status line shows us, from left to right::
• The level of the masters general fader,
SM,
from
0
to
FF
. If
SM
is under
FF
its level
appears in a red field. If its blackout key is active (LED at on), the
SM
flag appears in a red
field.
•
After, you can see the
SM
configuration as
Masters
(when controls the masters output) or
Dmx In
(when controls the Dmx input).
•
After, the page number loaded appears. When some masters is modified (content) near the
page number a
*
appears. After the page number, if proceed, the page text appears.
•
At the end, the current status of the
Mn
keys appears, always in a red filed. This current
mode, for masters with groups, memories or channels, can be:
GO
,
FLASH
or
SOLO
.
Master number & output level:
Each master is identified by its number (
00
to
24
or
48
). This number appears in white when
the master isn’t active in scene (
Mn
LED at 50%), and appears in yellow when the master is
active in scene (
Mn
LED at 100% or blinking). Near the master number appears its output level
(
00
to
FF
) in black.