LT HYDRA Plus, Manual

Page: 57 / 258

MEMORIES & GROUPS
&
6-3
HYDRA PLUS – LT LIGHT
If
Blind
is the active editor, the
BLIND
LED is lit, and the flag
Blind
appear in the status line
in a red field.
The
Blind
editor only shows us, in the auxiliary screens, its contents (channels, scrollers &
spots). The scene information only is showed when the
Stage
editor is active.
The functionality and commands are the same for both editors.
CALLING TO THE EDITOR SOME PLAYBACKS
Hydra Plus only stores the editor contents, for this reason, there are commands to call into
editor to some scene items (playbacks) that we want that they form part of editor.
Pre-select (select without levels/values) into the editor, some scene items.
To pre-select all the channels, scrollers or spots that are in scene, press:
CHANNEL THRU THRU
SCROLLER THRU THRU
SPOT THRU THRU
To pre-select a range of channels, scrollers or spots that are in scene, press:
CHANNEL # THRU THRU #’
SCROLLER # THRU THRU #’
SPOT # THRU THRU #’
To pre-select the whole scene, press:
SELECT SELECT
To pre-select the outputs of one or several masters, press:
SELECT Mn
Where
Mn
is the key of the desired master.
SELECT
q
Mn Mn Mn... (
As many keys as necessary
) SELECT
p
Remember:
q
makes that the key is hold down pressed
p
makes that the key can be released
To pre-select the outputs of one crossfader, press:
SELECT ASSIGNX
for the crossfader
X
SELECT ASSIGNY
for the crossfader
Y
Pre-select the contents of a memory, a group or a range.
To pre-select the contents of a memory or group press:
MEM # SELECT
GROUP # SELECT