LT HYDRA Plus, Manual

Page: 146 / 258

12-8
&
GENERAL FUNCTIONS
HYDRA PLUS – LT LIGHT
Selection In the commands line…
{editor} CHANNEL NEXT NEXT
LED at on
Gives the next channel in the editor
{editor} SCROLLER NEXT NEXT
LED at on
Gives the next scroller in the editor
{editor} SPOT NEXT NEXT
LED at on
Gives the next spot in the editor
When
NEXT
is in selective mode (its LED at on) each time that
NEXT
is pressed the next
channel, scroller or spot in editor is searched. Press
NEXT
as many times as will be necessary.
To exit of the selective mode, use one of these options:
CHANNEL # {level}
SCROLLER # {color}
SPOT # {values}
GROUP # {level}
MEM # {level}
RST
NEXT
LED at off
Now,
NEXT
is in general mode
In resume, any other selection returns to the general mode of
NEXT
.
Example: Select the spots 1, 5 and 7 and adjust their positions.
Commands Comments
SPOT 1 SPOT 5 SPOT 7
Selection of the 3 spots
@@
Edition of their dimmers at 100%
SPOT NEXT
Pre-selection of spot 1
TB
Adjustment of the position of this spot
NEXT TB
Pre-selection of spot 5 and adjustment of its position
NEXT TB
Pre-selection of spot 7 and adjustment of its position
TEST FUNCTIONS
Using the editor, it’s possible to test channels, spots dimmers, groups or memories .
The TEST function permits us to isolate (in the editor) a channel, a spot dimmer, a memory or a
group with the objective to check it. In this testing process: