LT HYDRA Plus, Manual

Page: 135 / 258

MACROS
&
11-5
HYDRA PLUS – LT LIGHT
When
1
B
to
10
B
are in
Auto
mode, to execute a macro:
If needed force to
Macro-Auto
mode, pressing
MACRO
.
Select its bank and press the corresponding key.
ASSOCIATED TO A MEMORY
A macro associated to a memory is executed when its memory is playback in sequence
(crossfaders or masters). Macro is associated to a memory as
Command
. When memory begins
its fade-in scene, the macro is executed.
To associate a macro to a memory, open the memories list, pressing
MEMLST
Access to
Command
of the desired memory, and select
1: MACRO
Access to the next cell (
à
) to open the selection red window.
Select the desired macro number,
#
This is the method to synchronize in the crossfaders any action (master playback, effect playback,
load of pages, etc).
FROM THE TC, IN THE EVENTS LIST
In the events list, that it’s edited inside menu
23: Time Code
, it’s possible to create an event to
execute a desired macro directly. See the chapter 21.
EXAMPLES
The macros have a lot of possibilities. In this section, only there are some basic examples:
•
Macro 1, named
Cross X
, loads in
X2
the memory 123 and starts the crossfade.