LT HYDRA Plus, Manual

Page: 170 / 258

14-12
&
MENUS
HYDRA PLUS – LT LIGHT
•
CHS OUT GM
, that allows to edit the channels number that they are not controlled by the
GM
. By default 0.
The scrollers & spot parameters aren’t controlled by
GM
(except the
Dimmer
parameter),
The conventional channels that are excluded of this
GM
control are always the last system
channels, and they are used to control a smoke machine or something like that. Example: If a
console has 250 channels, and 3 channels are excluded here, these channels will be the 250,
249 & 248.
•
Manual Track
, when this option is
ENABLED
, the manually activated masters control
their
LTP
parameters in all moment (fade-in & fade-out processes), using their return values
and avoiding that these
LTPs
remain to tracking value.
32: SYSTEM
To open this menu press
MENU 32
The editable parameters are:
•
LANGUAGE
, that allows to select the language to messages and warnings.
•
KEYBOARD
, that allows to select the language (type) of the alphanumeric keyboard. To
accept this selection is needed turn off the console.
•
KEYBOARD
, that allows to select the active alphanumeric keyboard, this keyboard can be
the internal placed in the drawer (
INT
) or an external connected to KBD connector (
EXT
).
•
LEDS BRIGHT
, that allows to select the brightness level for blue LEDS of the frontal panel
(5 options are available).
•
BEEP
, that allows to adjust the tone of the warning acoustic signal (beep). The
BEEP
can
have values from
0
to
100
, where
0
indicates a deactivated
BEEP
, and from
1
to
99
adjust
the
BEEP
frequency. By default the BEEP is at
10
.
A beep is emitted each time that the system requests the user attention, and helping to the
beep, the command line appears in a red filed.
•
LIGHT
, that allows to adjust the level of the working lights (0-100). By default at 0 %.
•
MONITOR
, that allows to configure the look of the screens, select:
0: LIGHT
to set a light background (white).
1: DARK
to set a dark background (gray).
•
DISPLAY
, that allows to adjust the Display contrast (0-100). By default 100%.
•
DATE
, it’s the current date.
•
TIME
, it’s the current time.
33: DMX OUTS UPDATES
To open this menu press
MENU 33
Here, it’s possible to adjust the speed transmission for each one of the DMX outputs:
DMX 1
,
DMX 2
,
DMX 3
&
DMX 4
.
The adjust of speed has the objective of avoid problems with oldest DMX receivers:
0: FAST
DMX output is updated 20 times per second (Default option and ASCII norm).