LT HYDRA Plus, Manual

Page: 229 / 258

HYDRA PLUS – LT LIGHT
22 .- RESET & UPDATE
RESET
Store the Show to disk before do a Reset. The Reset process erases all
console data.
To do a Reset:
•
Turn off the console
•
Press and hold down pressed
ß
•
Turn on the console
•
When the display presents
RST: Loading System
, release
ß
The console is initialized with all its data by default! All the memories, libraries, groups, pages,
Patches, etc, have been deleted.
SOFTWARE UPDATE by FLOPPY
The Hydra Plus software version is updated from a floppy disk.
You can obtain each new software version in the LT web (www.lt-light.com) or contacting with
your LT distributor.
Store the Show to disk before do a software update. The update process
implicates a Reset.
To update the software version:
•
Turn off the console
•
Insert the disk with the new software version stored in a disk unit
•
Press and hold down pressed
ENTER
&
à
•
Turn on the console. When the display presents
Updating system
, release the pressed keys
•
Follow the instructions that appear in the screen...The first request that the console does us is
the selection of the language for the instructions.
Tip
:
Following the instructions, store the old software version in an empty disk as a security
measurement.