LT HYDRA Plus, Manual

Page: 221 / 258

HYDRA PLUS – LT LIGHT
20 .- SOUND & EXTERNAL TRIGGERS
Hydra Plus has one audio input (
Sound
) and 2 external triggers (
Ext
). Each one of the filtered
signals of the audio input can be configured to control a key or fader, and each external trigger to
control a key.
The
AUDIO
connector admits an audio signal of 1Vpp. This signal is filtered in the 3 basic
bands:
Bass
,
Medium
&
Treble
. Each one of the 3 filtered signals can be used to control a key
or fader.
The external triggers are connected in
EXT1
&
EXT2
connectors. These signals are activated
when the pin-3 (signal) and pin-1 (ground) are connected (for this, it’s possible use a pushbutton
or something like this). When an external signal is activated its associated key is pressed, and
when this signal is deactivated, the key is released.
The signals of
Bass
,
Medium
&
Treble
, are activated when the audio input exceeds (per band)
a certain level (
Sensibility
). When one of these signals is activated its associated key is pressed;
or its associated fader is moved in accordance with the filter level, modulating the fader output.
The level of activation the each filter (0-100),
Sensibility
, is adjusted independently entered the
desired level in its
Sensibility
cell. Near each filter a
Test
value (current filter output) is
presented, with the objective to help us to adjust the
Sensibility
.
After a Reset the Sound input and external triggers are deactivated (
Off
).
The configuration of these inputs are placed in
the menu
22: Ext & Sound
; open this menu
pressing
MENU 22
This screen is divided in 2 zones: the setup line
and the configuration table. To toggle between
these zones use the mouse or press
MENU
To close this screen, press
EXIT