LT HYDRA Plus, Manual

Page: 63 / 258

MEMORIES & GROUPS
&
6-9
HYDRA PLUS – LT LIGHT
PROGRAMMING TIMES FROM THE MEMORIES LIST
It’s possible to program any time for any memory inside the memories list. To open the
memories list press one of these options:
MEMLST
MEM
MDFY
In this memories list the times, texts and other general parameters can be edited.
The memory in edition is marked in a yellow field, and the data in edition is a red field.
Select the memory to edit it pressing á and â (or using the external mouse).
Select the data to edit it pressing ß and à (or using the external mouse).
To edit this list, select the memory data, and enter its value. To accept the entered data press
ENTER
or select other data. Close this screen pressing
EXIT
The memories list shows us the default times in gray, and these times will be changed if the
corresponding default time is changed.
The default times are showed in this screen in its setup line. It’s possible to access to this setup
line to change any of these times pressing
MENU
. Inside setup line, select the desired default
time and change its value. Accept the edition pressing
ENTER
and return to the memories list
pressing
MENU
again or pressing
â
.
To page the memories list press
SCREEN
To edit a memory directly:
Access to any
Mem
cell (in gray field)
Enter the memory number to edit,
#
And press
ENTER
or à to select the memory
#
2
Menus
The memories default times can be changed inside the menu
30: Editor & Times
. See chapter
14.