LT HYDRA Plus, Manual

Page: 194 / 258

15-12
&
CHANNELS & SCROLLERS PATCH
HYDRA PLUS – LT LIGHT
Park
Curve, (
5: PRK
). A channel with park curve is always at 100% (of power output). Its
output is independently of the control level. And this curve is used, mainly, in backstage (dressing
rooms, working lights...) and it guarantee that the channel is at 100% if the consol is turned off.
USER CURVES
The user curves are defined in the menu
05: Define Curves
. These curves are named
US6
,
US7
&
US8
. About these curves:
•
After a Reset these 3 curves are like the lineal curve.
•
They can be
Soft
(conventional curves) or
Hard
(specials for effects).
•
These curves are defined using 10 points.
To open the menu
05: Define Curves
, press:
MENU 05
This screen presents the current definition of the 3 user curves; the definition is in graphic mode
and numeric mode (using 2 scales,
dig
: 0-255 y
%%
: 0-100)
•
Press
ß
and/or
à
to select the point of the curve to edit. The selected point is presented in
red, and is ready to edit it.
•
Press
↑
and/or
↓
to edit the value of the selected point (these keys work in 0-255 scale), or
enter the value for the selected point,
#
in scale 0-100.
•
Repeat this steps as many times as points to edit.
When the edition is finished, press
EXIT
to close this menu screen.
Special editions:
The commands of the Setup line are grouped by curve, and they are:
‚
US6
,
‚
US7
&
‚
US8.
Remember, that pressing
MENU
, the cursor toggle between Setup line and curves edition zone.