LT HYDRA Plus, Manual

Page: 33 / 258

HYDRA PLUS – LT LIGHT
5 .- EDITOR
The editor is used to select channels, scrollers and spots , and to assign them dimmer levels and
parameter values, with the objective to set the desired picture and to store it as memory or group.
Also it’s possible to select
memories and groups , as well as the outputs of any playback for
editions more versatile. In memories and groups only are stored the editor contents.
The pictures can be edited in stage or in blind, because
Hydra Plus has 2 editors:
The
Stage
editor works in live controlling totally the scene (including the playbacks outputs).
The
Blind
editor doesn’t affect to the scene output.
Only one of these editors is active. To toggle between the
Stage
and
Blind
editors, press
BLIND
. The activation of one editor doesn’t affect to the contents of the editors.
When
Blind
editor is active, the
BLIND
LED is lit, and in the status line, the flag
Blind
appears in a red filed. The auxiliary screen presents only the editor contents when
Blind
is active; and presents the whole scene when the
Stage
is active.
Both editors use the same commands to do the same actions.
DEFAULT SELECTION
Each Item is selected for its function key and a number. Examples :
CHANNEL 25
,
GROUP 3
With the objective to decrement the keys number to press, at the beginning of the
command
line always is present the last item used, and it’s the default selection. Example, if here appears
spot
}
, to select the spot 25 is enough press
25
, instead of
SPOT 25
.
The default selection can be:
channel
}
,
scroller
}
,
spot
}
,
group
}
or
memory
}
After a Reset the default selection always is
channel
}
Besides this, the command line presents the last pressed keys. These pressed keys are cleared
each time that an action is done.
To delete the last pressed key, that is presented in the command line, press
C.
This function is
used to delete a bad entered number, and it doesn’t affect to the editor contents.
To clear completely the command line press
C C