LT HYDRA Plus, Manual

Page: 40 / 258

5-8
&
EDITOR
HYDRA PLUS – LT LIGHT
THE SPOTS
The spot is an item that it permits to control a moving light. Each moving light is controlled for
a spot number, and from this spot number we have access to all its parameters.
The first step is the configuration of the type and number of moving light to use. This
configuration is done inside the menu
04: Spots
(See chapter 4 – Spots Patch)
Hydra Plus can be configured to control a maximum of 250 spots. The configured spots cannot
exceed the maximum number of attributes. The maximum number of attributes is in accordance
with the channels-number and the scrollers-number configured inside the menu
50: Console
Configuration
.
In this chapter is based in the next spots configuration:
Spots 1 to 8 are configured as Mac 500 (
MC500
)
Spots 9 to 16 are configured as Mac 600 (
MC600
)
The auxiliary screen shows these spots as:
THE SPOTS IN THE EDITOR
It’s possible to select one spot, group or range to edit, at once, one or several of their parameters.
A spots is composed for parameters, and each one controls a function of the moving light.
In the editor, the
spots
can be:
Present , that is of a previous edition and it’s marked with a brown arrow near its number.
Selected , that is been edited and it’s marked with a red arrow near its number.
In the editor, a spot
parameter
can be:
Present , that is of a previous edition and it’s showed in a brown field.
Pre-selected , that is waiting be edited and its value is showed in red .
Selected that is being edited and it’s showed in a red field.
Spot number Spots type Parameter name Parameters values