LT HYDRA Plus, Manual

Page: 72 / 258

6-18
&
MEMORIES & GROUPS
HYDRA PLUS – LT LIGHT
OTHERS ACTIONS WITH PARTS
MEM # PART #’ LOAD Mn
Loads in
Mn
, only the part
#’
of the memory
#
MEM # PART #’ SELECT
Selects in the editor only the part
#’
of the memory
#
MEM # PART #’ CALL
Call in the editor only the part
#’
of the memory
#
MEM # PART # RELEASE
Releases of the editor only the part
#’
of the memory
#
Remember that
CALL
&
RELEASE
execute these commands using 2 seconds for the fading
the
HTP
items; and
CALL CALL
&
RELEASE RELEASE
execute these commands
suddenly.
MODIFY A RANGE OF MEMORIES OR GROUPS
It’s possible to modify a range of memories or groups.
The first step is select the memories or range groups in modification mode:
RST MEM # THRU #’ MDFY
{modifications} REC #
1
#
2
REC
RST GROUP # THRU #’ MDFY {modifications} REC #
1
#
2
REC
When
MDFY
is pressed, only the first memory (or group) of the selected range is loaded in the
editor to modify it. In the status line appears the flag
Modify MEMs
(or
Modify GRPs
) in a
red filed.
After the modifications, press
REC
to store them over all the memories of the range. When
REC
is pressed, a red window appears with the options of mode (
#
1
) and attribute (
#
2
).
After that the options
#
1
and
#
2
have been entered, press
REC
again to modify the range.
The modifications are applied to the range memories, in accordance with the mode options (
#
1
)
are:
1: ABSOLUTE/ABSOLUTE
Mode where the each channel level or parameter value that has been modified takes the editor
value to be modified.
2: RELATIVE/BASE
HTP=RELATIVE
: Mode where each channel level or dimmer level that has been
modified, takes the relative value of the edition to be modified. Example: If a channel