Gocator Web Interface • 111
Gocator 1100 & 1300 Series
6
Specify if the output is Immediate or Scheduled.
An analog output can become active immediately or scheduled. Check the Scheduled option if the
output needs to be scheduled.
A scheduled output becomes active after a specified delay from the start of Gocator exposure. A
scheduled output can be used to track the decisions for multiple objects as these objects travel from
the sensor to the eject gates. The delay specifies the distance from the sensor to the eject gates
An Immediate output becomes active as soon as the measurement results are available. The output
activates after the Gocator finishes processing the data. As a result, the time between the start of
Gocator exposure and output activates depends on the processing latency. The latency is reported in
the dashboard and in the health messages.
7
Specify a Delay.
The delay specifies the time or spatial location between the start of Gocator exposure and the
output becomes active. The delay should be larger than the time needed to process the data inside
the Gocator. It should be set to a value that is larger than the processing latency reported in the
dashboard and in the health messages.
The unit of the delay is configured in the trigger panel. Refer to
Trigger Panel (page 65) for details.
The analog output takes about 75 us to reach 90% of the target value for a maximum change, then
another ~40 us to settle completely.
To respond to software scheduled commands:
1
Navigate to the Analog panel.
2
Set Event to Software.
3
Specify if the output is Immediate or Scheduled.
An analog output value becomes active immediately or scheduled. Immediate output becomes active
as soon as a Scheduled Analog Output (page 147) is received.
Software scheduled command can schedule an analog value to output at a specified future time or
encoder value, or changes its state immediately. The Delay setting in the panel is ignored. Commands
that schedule event in the past will be ignored. An encoder value is in future if the value will be
reached by moving in the forward direction (the direction that travel calibration was performed in).
Summary of Contents for Gocator 1100 Series
