LMI Technologies Gocator 1100 Series, User Manual

Page: 121 / 250

Gocator Device Files • 121 Gocator 1100 & 1300 Series
Range
The Range element contains settings that affect range measurements. Simple child elements in Range
are defined below:
Range Child Elements
Element Type Description
MeasurementOptions String Constraint for available measurement types - comma delimited list (e.g.
“RangePositionZ, RangeDifference”).
The Range element also contains the Measurement sub-element. The Measurements element contains
one sub-element for each requested range measurement.
The id attribute associated with each measurement defines an identifier that must be unique among all
measurements in the configuration file.
e.g.
<Width id=”1001”>
m
eaSuRementS
/ R
ange
P
oSition
Z
A RangePositionZ element defines settings for a range position-z measurement.
RangePositionZ Child Elements
Element Type Description
Name String Setting for measurement name.
Source 32s Setting for range source.
DecisionMin 64f Setting for decision threshold minimum (mm).
DecisionMax 64f Setting for decision threshold maximum (mm).
LinkEnabled 32u Setting to enable/disable linking:
0 – Disable
1 – Enable
Link 32u Measurement ID to link with.
Scale 64f Setting for scale factor to apply to measurement value.
Offset 64f Setting for offset to apply to measurement value
SmoothingEnabled 32u Setting to enable or disable the smoothing filter:
0 – Disable
1 – Enable
SmoothingWindow 32u Setting for the smoothing window (frames).
HoldEnabled 32u Setting to enable or disable the hold filter:
0 – Disable
1 – Enable
SourceOptions String Constraint for eligible range sources (comma-delimited list).
SmoothingWindowMin 32u Constraint for smoothing window minimum (frames).
SmoothingWindowMax 32u Constraint for smoothing window maximum (frames).
LinkIds 32u List of linkable measurements.
m
eaSuRementS
/ R
ange
d
iFFeRence
A RangeDifference element defines settings for a range difference measurement.
RangeDifference Child Elements
Element Type Description
Name String Setting for measurement name.