LMI Technologies Gocator 1100 Series, User Manual

Page: 171 / 250

Protocols • 171 Gocator 1100 & 1300 Series
Format Value Explanation
%n New line
%r Carriage return
%% Percentage (%) symbol
Standard Result Format
Measurement results can either be sent in the standard format, or in a custom format. In the standard
format, the users select in the web interface which measurement values and decisions to send. For each
measurement the following message is transmitted:
M t
n
, i
n
, V v
n
, D d
1
CR
Standard Result Format:
Field Shorthand Length Description
MeasurementStart M 1 Start of measurement frame.
Type t
n
n Hexadecimal value that identifies the type of measurement. The
measurement type is the same as defined in Data Results (page
150) section.
Id i
n
n Decimal value that represents the unique identifier of the
measurement.
ValueStart V 1 Start of measurement value. This field and the following Value
field are optional – they will only be present if the measurement
value has been selected for transmission.
Value v
n
n Measurement value, in decimal. The unit of the value is
measurement-specific.
DecisionStart D 1 Start of measurement decision. This field and the following
Decision field are optional – they will only be present if the
measurement decision has been selected for transmission.
Decision d
1
1 Measurement decision:
0 – Fail
1 – Pass
Custom Result Format
In the custom format, users enter a formatting string with place holders to create a custom message.
The default formatting string is "%time, %value[0], %decision[0]".
Result Placeholders:
Format Value Explanation
%time Timestamp
%encoder Encoder position
%frame Frame number
%value[Measurement ID] Measurement value of the specified measurement ID
%decision[Measurement ID] Measurement decision of the specified measurement ID