LMI Technologies Gocator 1100 Series, User Manual

Page: 74 / 250

Gocator Web Interface • 74 Gocator 1100 & 1300 Series
d
ynaMic
e
xpoSuRe
The sensor automatically uses past range information to adjust the exposure to yield the best range.
This is used when the target surface changes from scan to scan.
To enable dynamic exposure:
1 Select Range Mode.
2
NavigatetotheSensorpanelfortheMainorBuddysensor.
Click the arrow next to Exposure to expand the panel. Click the Main or Buddy button to select the
sensor.
3 Select Dynamic.
4 Set the minimum and maximum exposure.
The auto-set function can be used to automatically set the exposure. First, place the brightest target
in the field of view and press the Auto Set Min button to set the minimum exposure. Then, place the
darkest target in the field of view and press the Auto Set Max button to set the maximum exposure.
5
Run the sensor and check that laser ranging is satisfactory.
If not satisfactory, adjust the exposure values. Switch to Video mode to use video to help tune the
exposure.