LMI Technologies Gocator 1100 Series, User Manual

Page: 34 / 250

Getting Started • 34 Gocator 1100 & 1300 Series
Gocator Setup
The Gocator is shipped with a default configuration that will produce laser ranges on most targets.
The following sections walk through the steps required to set up sensor to produce laser ranges. After
you have completed the setup, you can perform laser ranging to verify basic sensor operation
R
unning a
S
tandalone
S
enSoR
S
yStem
To configure a standalone sensor system:
1 Power up the sensor.
The power LED (blue) should turn on
immediately.
POWER LED
2 Enter the sensor's IP address 192.168.1.10 in
a web browser.
http:// 192.168.1.10
3
Login as Administrator with no password.
The interface display language can be changed
using the language option. After selecting the
language, the browser will refresh and the web
interface will display in the selected language.
4 Select the Connection Page.
5
Specify the Connect To setting.
The Connect To setting specifies whether the
sensor system is standalone, or connected to a
Master 100 or a Master 400/800/1200/2400. For
single sensor operations select Standalone or
Master 100.