LMI Technologies Gocator 1100 Series User Manual Download

Page: 18 / 250

Getting Started • 18

Gocator 1100 & 1300 Series

Hardware Overview

The Gocator 1100 and 1300 sensors are available in either the Top Mount Package or the Side Mount

Package. Side Mount Package is designed for side mounting and the Top Mount Package is designed for

top mounting.

Side Mount Package

CAMERA

LASER EMITTER

I/O CONNECTOR

POWER/LAN CONNECTOR

SERIAL NUMBER

POWER, RANGE AND LASER

INDICATOR

Item

Description

Camera

Observes laser light reflected from target surfaces.

Laser Emitter

Emits structured light for laser ranging.

I/O Connector

Accepts input and output signals.

Power / LAN Connector Accepts power and laser safety signals and connects to 1000 Mbit/s Ethernet network.
Power Indicator

Illuminates when power is applied (blue).

Range Indicator

Illuminates when camera detects laser light and is within the target range (green).

Laser Indicator

Illuminates when laser safety input is active (amber).

Serial Number

Unique sensor serial number.

Summary of Contents for Gocator 1100 Series



























































































































































































































































Search results

Summary of Contents for Gocator 1100 Series

Reviews:

Related manuals for Gocator 1100 Series

Brands by name

Popular brands

LMI Technologies Gocator 1100 Series, User Manual

Search results

Summary of Contents for Gocator 1100 Series

Reviews:

Related manuals for Gocator 1100 Series

Brands by name

Popular brands