LMI Technologies Gocator 1100 Series, User Manual

Page: 149 / 250

Protocols • 149 Gocator 1100 & 1300 Series
R
eStoRe
F
actoRy
The Restore Factory command restores the connected sensor to factory default settings. This command
has no effect on connected Buddy sensors.
Note that the sensor must be reset or power-cycled before the factory restore operation can be
completed.
Command
Field Type Description
length 64s Command size – in bytes.
id 64s Command identifier (0x4301).
resetAddress 64s Specifies whether network address should be restored to default:
0 – Do not reset address
1 – Reset address
Reply
Field Type Description
length 64s Reply size – in bytes.
id 64s Reply identifier.
status 64s Reply status.
S
et
c
onnection
t
yPe
The Set Connection Type command save the type of the master to the sensor's non-volatile storage.
Command
Field Type Description
length 64s Command size – in bytes.
id 64s Command identifier (0x4514).
type 64s Connection type:
0 – None
1 – Master 100
2 – Master 200
3 – Master 400
4 – Master 800
5 – Master 1200
6 – Master 2400
Reply
Field Type Description
length 64s Reply size – in bytes.
id 64s Reply identifier.
status 64s Reply status.
g
et
c
onnection
t
yPe
The Get Connection Type command returns to the set connection type.
Command
Field Type Description
length 64s Command size – in bytes.
id 64s Command identifier (0x4515).