LMI Technologies Gocator 1100 Series, User Manual

Page: 65 / 250

Gocator Web Interface • 65 Gocator 1100 & 1300 Series
Operation Mode Panel
The Gocator web interface supports two operation modes : Video and Range. The operation mode can be
selected in the Operation Mode panel.
Mode and Option Description
Video Output video images from the Gocator. This mode is useful for configuring
exposure time and troubleshooting stray light or ambient light problems.
Range Output ranges and perform measurements. Video images are processed internally
to produce laser ranges and measurements.
Acquire Intensity When this option enabled, an intensity value will be produced for each laser range.
Trigger Panel
A trigger is an event that causes a sensor to take a single picture. When a trigger is processed, the laser
is strobed and the camera exposes to produce an image. The resulting image is processed inside the
sensor to yield a laser range (distance information), which can then be used for measurement.
The laser and camera inside a sensor can be triggered by one of four sources:
Trigger Source Description
Time Sensors have an internal clock that can be used to generate fixed-frequency
triggers. The external input can be used to enable or disable the time triggers.