Lexmark C9235 User Manual Download Page 204

Page: 204 / 246

Secure the tray to the printer with the locking clips and metal bracket.

•

Front

•

Rear

Close the trays, and then attach the connector cover.

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Turn on the printer.

Add the tray in the print driver to make it available for print jobs. For more information, see

“Adding available

options in the print driver” on page 229

Upgrading and migrating

204

Summary of Contents for C9235























































































































































































































































Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands

Lexmark C9235, User Manual

Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands