Lexmark C9235 User Manual Download Page 43

Page: 43 / 246

Printing from a ﬂash drive

Insert the ﬂash drive.

Notes:

•

If you insert the ﬂash drive when an error message appears, then the printer ignores the ﬂash drive.

•

If you insert the ﬂash drive while the printer is processing other print jobs, then

Busy

appears on the

display.

From the display, touch the document that you want to print.

If necessary, conﬁgure other print settings.

Send the print job.

To print another document, touch

USB Drive

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the ﬂash drive or

the printer in the area shown while actively printing, reading, or writing from the memory device.

Printing

Summary of Contents for C9235























































































































































































































































Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands

Lexmark C9235, User Manual

Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands