Lexmark C9235 User Manual Download Page 14

Page: 14 / 246

Staple ﬁnisher

Notes:

•

This option is not supported if another ﬁnisher is installed.

•

This option is supported only in some printer models.

Optional 3000

‑

sheet tray

Note:

This option is supported only if another optional tray is installed.

Optional 2 x 500

‑

sheet tray

Optional 2500

‑

sheet tray

Finisher

•

Staple, hole punch ﬁnisher

•

Booklet ﬁnisher

Attaching cables

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord to

an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the USB cable, any

wireless network adapter, or the printer in the areas shown while actively printing.

Learning about the printer

Summary of Contents for C9235























































































































































































































































Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands

Lexmark C9235, User Manual

Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands