Lexmark C9235 User Manual Download Page 185

Page: 185 / 246

Action

Yes

Step 2

Perform Color Balance.

From the home screen, touch

Settings

Print

Quality

Advanced Imaging

Color Balance

Adjust the settings.

Print the document.

Does the print appear tinted?

Contact

customer

support

The problem is
solved.

Contacting customer support

Before contacting customer support, make sure to have the following information:

•

Printer problem

•

Error message

•

Printer model type and serial number

Go to

http://support.lexmark.com

to receive e

‑

mail or chat support, or browse through the library of manuals,

support documentation, drivers, and other downloads.

Technical support via telephone is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries
or regions, go to

http://support.lexmark.com

Troubleshooting

185

Summary of Contents for C9235























































































































































































































































Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands

Lexmark C9235, User Manual

Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands