Lexmark C9235, User Manual

Page: 19 / 246

•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Apps > Device Quotas > Configure .
3
From the User Accounts section, add or edit a user, and then set the user quota.
4
Apply the changes.
Note: For information on how to configure the application and its security settings, see the Device
Quotas Administrator’s Guide .
Using Display Customization
Before using the application, make sure to do the following:
•
From the Embedded Web Server, click Apps > Display Customization > Configure .
•
Enable and configure the screen saver, slideshow, and wallpaper settings.
Managing screen saver and slide show images
1
From the Screen Saver and Slideshow Images section, add, edit, or delete an image.
Notes:
•
You can add up to 10 images.
•
When enabled, the status icons appear on the screen saver only when there are errors, warnings, or
cloud
‑
based notifications.
2
Apply the changes.
Changing the wallpaper image
1
From the home screen, touch Change Wallpaper .
2
Select an image to use.
3
Apply the changes.
Running a slide show from a flash drive
1
Insert a flash drive into the USB port.
2
From the home screen, touch Slideshow .
Images appear in alphabetical order.
Note: You can remove the flash drive after the slide show starts, but the images are not stored in the
printer. If the slide show stops, then insert the flash drive again to view the images.
Configuring Eco
‑
Settings
1
From the home screen, touch Eco
‑
Settings .
2
Configure Eco
‑
Mode or Schedule Power Modes.
3
Apply the changes.
Setting up and using the home screen applications 19